Download Avocent Matrix High Performance KVM

Transcript
On-Board Web Interface ..... 33
5. Click Save to push the changes to all attached receivers. Events tab
The Events tab is where event logging is configured. Events can be manually downloaded to a file or automatically sent to a syslog server for longer term storage.
Individual events can be enabled or disabled by manipulating the Disabled Events and Enabled Events lists. Simply click on one or more events and click the buttons to move them from one list to the other.
The table below lists the options and descriptions for the Events tab.
Events Tab Settings
Option
Description
Syslog Server IP Address
The IP address of a syslog server that event log messages should be sent to when they are generated.
Log Error Events
Controls whether Errors are recorded to the event log.
Log Warning Events
Controls whether warnings are recorded to the event log.
Log Informational Controls whether informational messages are recorded to the event log.
Events
NOTE: Logged events are stored in volatile memory on the switch. If power is lost or the switch is reset then the list of events is cleared. Defaults
The Defaults tab is where the OSD and receiver session time-outs are set as well as the transmitter USB Mode and traffic priorities are configured. These defaults apply when a new receiver or transmitter is added to the system.
Default Tab Options Descriptions
Setting
Description
OSD Inactivity Timeout
The time-out, in minutes, after which the OSD display disappears. Receiver Session Timeout
The time-out, in minutes, after which the user is logged out and his KVM session terminated if there is no keyboard/mouse activity at the receiver.
Transmitter USB Mode
The default set for the transmitter USB when a new transmitter is added. By default, this is set to all