Download as308ue. - Renesas Electronics
Transcript
AS308 V.1.00 Input/Output Files of AS308 Assembler List File Only when you specified command option (-L or -LM), as308 generates source line information and relocatable information as a file in text format that can be output to a display screen or printer . Format of assembler list file The information listed below is output to an assembler list file. The output format of this assembler list file is shown in Example of Assembler List File -1. (1) List line information : SEQ. Outputs the line numbers of the assembler list. (2) Location information : LOC. Outputs the location addresses of a range of object code that can be determined when assembling. (3) Object code information : OBJ. Outputs the object code corresponding to mnemonics. (4) Line information : 0XMSDA Outputs information on the results of source line processing performed by as308. Specifically, this information contains the following: XMSDA Contents 0 Indicates the include file's nest lebel. x Indicates that this line was not assembled in condition asemble. M Indicates that this is a macro expansion line. S Indicates that jump distance specifier S was selected. B Indicates that jump distance spedifier B was selected. W Indicates that jump distance spedifier W was selected. A Indicates that jump distance spedifier A was selected. Z Indicates that zero form (:Z) was selected for the instruction format. S Indicates that short form (:S) was selected for the instruction format. Q Indicates that quick form (:Q) was selected for the instruction format. * Indicates that 8-bit displacement SB relative addressing mode was selected. 0-9 57