Download Legacy Technologies

Transcript
Bridges
SCSI-to-Fibre channel bridge
Host
Fibre
Channel
switch
SCSI bus
connections
Fibre Channel link
SCSI devices
Figure 41
Host mode
Simple storage mode configuration
You may find that some servers and operating systems will not
support a Fibre Channel HBA. This topology is not qualified, and will
be handled as required on a case-by-case basis.
SCSI-attached hosts, though supported by many bridge vendors,
have not yet been validated in the EMC Quality Assurance process.
The differences between Host and Storage mode should not be taken
lightly and therefore should not be implemented without a thorough
review of the customer's configuration and SAN's operational
requirements.
Supported SCSI-to-Fibre Channel fabric bridges
EMC evaluates the reliability, functionality of performance of all
products prior to their inclusion into our SAN solution sets. Table 1
lists the products and their current feature support, as well as the
EMC validation status. E-Lab Navigator lists the EMC-qualified
features.
Table 1
66
Supported SCSI-to-Fibre Channel fabric bridges (page 1 of 2)
Feature
Crossroads
CrossPoint 4200
ADIC SAN
Gateway
Maximum Fiber Ports
1
6
Maximum SCSI Busses
4
4
Fibre Channel Single-Mode Ports
Yes
No
Fibre Channel Multimode Ports
Yes
Yes
Fibre Channel Switched Fabric
Yes
Yes
Legacy Technologies Reference Manaul