Download CSDP Plus Servo Drive
Transcript
The performance specifications of CSDP Plus Classification Item Specifications Command Pulse Type Position Control Command Input Signal Command Input Type Pulse Frequency Control Signal Speed/Torque Command Input Signal Multi-level Speed Command Input Signal CW + CCW, Pulse Train+ Signal Train, A Phase+ BPhase (90° phase difference) Line drive - Voltage between levels 2.8 to 3.7 V Open collector - External Voltage 24 V, 12 V, 5 V Line drive - Maximum 900 kpps Open collector - Maximum 250 kpps Position Error Clear Input (Set at one of input terminals) Command Voltage Input Impedance Circuit Time Constant ±10 V DC (14 bit A/D conversion) Approx. 8.3 MΩ 35 µs or less Revolving Direction Used by assigning relevant functions to an input terminal Speed Selection Used by assigning relevant functions to an input terminal Position Output Type Input I/O Signal Output Dynamic Brake Regenerative Resistance Line Drive Output: A, B, Z Phase, Absolute Encoder Data Open Collector Output: Z phase Servo On, Alarm Reset, Gain Group Shift, Forward/Reverse Torque Limit, Forward/Reverse Revolution Prohibition, P/PI Control Shift, Control Mode Shift, Internal Speed Command, Zero Clamp, Position Command Pulse Inhibit, Absolute Encoder Data Transmission Position Completion, Near Postion, In Speed, Revolution Detection, Torque Limit Detection, Speed Limit Detection, Brake Control Output, Servo Warning Detection When servo power supply is off, When alarm occurs, When over-travel occurs (depending on conditions) Embedded in Drive Protection Function Over current, Over voltage, Overload, Over speed, Low Voltage, CPU Malfunction, Communication Malfunction, etc. Monitoring Position/Speed/Torque Command and Feedback, 2 Channel D/A Output for measuring position error Servo Motor Motors supported by CSDP Plus are as follows. CSDP Plus-supported motors CSDP-15BX2 CSDP-20BX2 CSDP-30BX2 CSDP-40BX2 CSDP-50BX2 CSMD-15 CSMD-20 CSMD-25/30 CSMD-35/40 CSMD-45/50 CSMF-25 CSMF-35 CSMF-45 CSMH-40 CSMH-50 CSMF-15 CSMH-15 CSMH-20 CSMH-30 CSMK-12 CSMK-20 CSMK-30 CSMS-15 CSMS-20 CSMS-25/30 CSMS-35/40 CSMS-45/50 RSMD-15 RSMD-20 RSMD-25/30 RSMD-40 RSMD-45/50 RSMF-25 RSMF-35 RSMF-45 RSMH-40 RSMH-50 RSMF-15 CSMK-45/60 RSMH-15 RSMH-20 RSMH-30 RSMK-12 RSMK-20 RSMK-30 RSMK-45/60 RSML-12 RSML-20 RSML-30 RSML-45/60 RSMN-12 RSMN-20 RSMN-30 RSMS-15 RSMS-20 RSMS-25/30 RSMX-13 RSMX-20 RSMX-30 RSMS-35/40 RSMS-45/50 RSMX-45 15