Download manual - SWS, a.s.

Transcript
Chapter 3 Tutorials
You need to specify a static routing rule on the Device to specify R as the router in charge of
forwarding traffic to N2. In this case, the Device routes traffic from A to R and then R routes the
traffic to B.This tutorial uses the following example IP settings:
N1
A
R
N2
B
Table 3 IP Settings in this Tutorial
DEVICE / COMPUTER
IP ADDRESS
The Device’s WAN
172.16.1.1
The Device’s LAN
192.168.1.1
A
192.168.1.34
R’s N1
192.168.1.253
R’s N2
192.168.10.2
B
192.168.10.33
To configure a static route to route traffic from N1 to N2:
1
Click Network Setting > Routing. Click Add New Static Route.
2
Configure the Static Route Setup screen using the following settings:
• Select Active.
• Specify a descriptive name for this routing rule.
• Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination, N2.
72
P-2812HNU(L)-Fx Series User’s Guide