Download Mars Workstation User Manual
Transcript
c. Heated surface, ORIGIO light source, and heated glass stage To operate the heated work area, refer to the section “Heated Surface”. To switch ON the ORIGIO Light Source and the working heated surface (s), press the button. When activated a small blue light on top of the button will switch on. This button simultaneously activates the working heated surface and the ORIGIO light source. (Note this feature is not available on the MARS LAF) To switch OFF the ORIGIO Light Source and the working heated surface (s), press the button again. The small blue light on top of the button will be switched OFF. B. CONTROL & PROGRAMMING This section describes how to access the different menus and how to control and to program some the features offered with your workstation. The Control & Programming menu of your workstation contains the following: Standard display. Adjusting the intensity of the internal light. Programming and controlling the UV light timer. Setting the internal clock. Adjusting display settings. Programming and controlling the automatic start and shut-off of the fan. Entering the service mode. 32 Version 4.1: June 24, 2014