Download Model 6800 Tunable Laser Controller
Transcript
System Operation 4.1.2 31 Laser Head The laser head embodies a simple, ultra-stable design which is shown below. Everything is mounted on a solid metal base and enclosed in a sealed package. You will never need to open the laser head to operate the laser. Unauthorized opening of the laser head will void the warranty. Figure 14 Laser Head Mechanical Schematic forTLB-6800 Series laser In this design, a diode laser is used as the gain medium. One end of the diode laser has a high reflectivity coating, which acts as an end mirror of the external-cavity. The other end of the diode has an antireflection coating. The diode laser is bonded to a temperature sensor and a thermoelectric cooling block which maintains a highly stable diode temperature. The laser beam radiating from the diode is collimated by a lens before striking a high-quality diffraction grating. The diffraction grating is precisely aligned at New Focus and its position is fixed with respect to the diode. From the diffraction grating, a fraction of the beam is directed to the tuning mirror. The position of this mirror determines the operating wavelength of the laser. The tuning mirror is mounted on a stiff arm. The arm is moved by a piezoelectric transducer (PZT) for micron scale movements, which correspond to sub-angstrom wavelength tuning precision. An SMA connector is available on the outside of the head enclosure for highspeed current modulation. The use of this feature is described in Section 4.7 Rear Panel. Finally, the laser head records how many hours the diode laser has operated. A new laser head will typically show 100-150 hours due to factory burn-in.