Download RAIDWatch User`s Manual
Transcript
Chapter 8 Channel Configuration Using RAIDWatch Manager, you can modify the configuration of any channel on the controller. With RAID controllers such as the EonRAID 2510FS, you can set the channel operation mode to host or drive, enable or disable channel termination, set IDs, set the transfer clock rate for synchronous communications, and select the transfer width. Channel configuration settings are available under Physical View in the RAID View window. This chapter describes the following Channel Configuration features: ♦ Channel Configuration Window – Section 8.1, page 8-2 ♦ User-Configurable Channel Parameters – Section 8.2, page 8-3 8.2.1 Channel Mode 8.2.2 Termination 8.2.3 Default Transfer Clock (in MHz) 8.2.4 ID Pool / AID / BID ♦ Setting the Configurations for a Channel - Section 8.3, page 8-6 Channel Configuration Window 8-1