Download Wire Rope - Ushapedia

Transcript
Appendix G Minimum rope information
When providing an enquiry or a purchase order, at least the following information should be supplied:
1. reference standard, i.e. EN 12385-4
2. quantity and length
3. nominal diameter
4. rope class or construction
5. core type
6. rope grade
7. wire finish
8. lay direction and type (single layer ropes are normally manufactured right hand ordinary lay unless otherwise
stated by the purchaser)
9. preformation (outer strands of single layer and parallel-closed ropes are normally preformed during manufacture.
The purchaser should specify any particular preformation requirements)
10. lubrication (at least the strands are lubricated during manufacture. The purchaser should specify any particular
lubrication requirements)
11. type of inspection document - refer EN 12385-1
12. any particular marking requirements
13. any particular packaging requirements
14. required minimum breaking force
27