Download OLICORP

Transcript
OLICORP
IRS SERIES
07/02/2013
Cabling and lamps strategy :
It is possible to use the NS-IRS cabinet with several types of lamps and with different cabling
topologies.
-
The NS-IRS automatically limits the Voltage sent to the lamp according to the type of
lamp. It is thus possible to use 400 VAC lamps on 480 VAC supply.
-
The total current regulated by the power cabinet cannot exceed 65A for NS-IRS and
75 A for the IRS12.
The total current / channel cannot exceed 7.5 A / channel for both products.
The Overload current is set to 200 A.
-
NS-IRS Absolute maximum ratings :
The NS-IRS is accepting input voltage between 185 VAC and 530 VAC, with frequencies
ranging between 47 and 63 Hz.
Power supply Voltage (VAC) +/-10%
Lamp Nominal Voltage
(Vrms)
208
230
400
415
440
480
230
-------------
1700
1000
950
900
820
360
-------------
-------------
2400
2300
2200
2000
400
------------------------3000
2900
2700
2500
Green : Maximal power (W) for lamps for a given Power supply voltage and lamp nominal voltage.
The minimal setting per channel is 10% of the nominal power of the lamp in power regulation
mode. This limit is set to avoid current bursts with tungsten lamps as the Resistance of the lamp
may slightly decrease when running at low power.
- 15 -