Download MPLAB IDE User`s Guide
Transcript
MPLAB® IDE User’s Guide 3.5 CREATING A NEW PROJECT A project contains the source files needed to build and test an application. A project configuration (workspace) includes the following: processor and display information, such as the nature, size and position of all open windows, toolbars, execution and debug settings. For more on projects and workspaces, see Chapter 4. “Projects and Workspaces”. Project and workspace global setting may be selected on the Project and Workspace tabs of the Settings dialog (Configure>Settings). Tutorial Step 4: For the tutorial, keep the default setup for projects and workspaces. Most notably, this means you will be using the one-to-one project-workspace model. 3.6 USING THE PROJECT WIZARD To create a new project in the current workspace, use the Project Wizard. • Select Project>Project Wizard. • The Project Wizard Welcome screen will appear. Click Next> to continue. • The Project Wizard Select a Device screen will appear. Verify that the device you have already selected using the Select Device dialog is shown here. To change the device, use the drop-down menu. Click Next> to continue. Tutorial Step 5: You will use the device selected in step 1, so there is no need to make any changes. 3.7 SETTING UP THE LANGUAGE TOOLSUITE You will now add language tools for use in the project. The Project Wizard Select a Language Toolsuite screen should be visible. • Select a language toolsuite (Microchip or Third Party) for your project from the “Active Toolsuite” drop-down menu. Only those language toolsuites that are installed and work with the previously-selected device are available to select from this menu. To see all available (installed) toolsuites, check “Show all installed toolsuites.” If you still don't see the desired toolsuite in this list, click Help! My Toolsuite Isn't Listed! for more information. • A list of tools in the selected toolsuite are shown in a box under “Toolsuite Contents”. A tool with a red “X” preceding it is not installed or the path to the executable is not known to MPLAB IDE. To assign or check assignments of tools to executable files, click on the tool to show the executable and path under “Location of Selected Tool”. Type in this text box to enter or change the assignment, or click Browse to find the executable. • Click Next> to continue. DS51519A-page 50 2005 Microchip Technology Inc.