Download draft - Alacron.com
Transcript
DRAFT Smart Features 6.5.2 Determining the Address of a Smart Feature’s CSR The control and status register (CSR) for each smart feature is identified by a 128 bit Globally Unique Identifier (GUID). GUIDs are also known as UUIDs (Universal Unique Identifier). A GUID consists of: • One 32 bit number (D1) • Two 16 bit numbers (D2, D3) • A sequence of 8 bytes (D4[0] - D4[7]) GUID example: CA8A916A (D1) - 14A4 - (D2) 4D8E - BBC9 - (D3) (D4[0] - D4[1]) 93DF50495C16 (D4[2] - D4[7]) Section 6.7 describes the standard smart features available on A600f cameras. Each smart feature description includes the GUID assigned to the feature’s CSR. To determine the starting address of a smart feature’s CSR, the feature’s CSR GUID must be written to the Smart Features Inquiry register. The Smart Features Inquiry register’s offset relative to the Advanced Features Access Control Register is 0x10. If the camera recognizes the GUID as the CSR GUID for an implemented smart feature, the address of CSR for the feature can be read from the Smart Features Address Register at offset 0x20. If the feature isn’t supported by the device, a value of 0x0 will be read from the Smart Features Address Register. Smart Features Inquiry Register Layout Bit Offset 0-7 8-15 16-23 10h 24-31 D1 14h D3 D2 18h D4[3] D4[2] D4[1] D4[0] 1ch D4[7] D4[6] D4[5] D4[4] 16-23 24-31 Smart Features Address Register Layout Bit Offset 6-4 0-7 8-15 20h Address Low 24h Address High BASLER A600f