Download USERS MANUAL

Transcript
SHOULDER STOCK INSTALLATION
#325
I>EKB:;HIJE9A
#332
#16
SHOULDER STOCK INSTALLATION
Place the Shoulder Stock (#332) on the back end upper section of the Receiver (#325). Once the
Shoulder Stock is in place tighten the Set Screw (#16) to secure the stock to the body of the marker.
The Set Screw (#16) is located on the right side of the receiver.
ADJUSTING SHOULDER STOCK LENGTH
* Turning the Shoulder Stock Screw (#333) counter-clockwise will loosen the Shoulder Stock allowing
for three different lengths to be achieved.
* Not Pictured.
10