Download Control Console User Manual
Transcript
Step 4: Start the USB Download application you downloaded from the ETC Web site. The application should display “Please Load Firmware File” in the status line. Step 5: Click the File button and select the SMRTFADE.SRC file. The application should display “Please Download Firmware” in the status line. Step 6: Click the Download button. The application should display “Downloading...” in the status line and the progress bar should begin to move. When the download is complete, the console will boot into the new updated software. SD Card Update Pre-formatted SD cards that are not formatted as FAT16 may not function properly in SmartFade. Smartfade does not support “FAT12” or “FAT32” file system formats. Ensure that the SD card is correctly formatted to FAT16 before loading software to it. CAUTION: Formatting your SD Card will erase any information stored on the card. Be sure to remove any important files from the card before formatting. Format SD Card Step 1: Insert the SD card into its reading device. Make sure the device is connected to your Windows PC. Step 2: Right-click on the SD card icon and select Format. This will open the formatting window. Step 3: In the File System field, select FAT. This will establish the card’s file system as FAT16. Step 4: Click Start and then complete the formatting process. Update software using the SD card: 44 Step 1: Obtain the file SMRTFADE.SRC from the download section of the ETC Web site: www.etcconnect.com Step 2: Copy the SMRTFADE.SRC file to the root directory of the SD card. DO NOT RENAME THE FILE! Step 3: Prepare the console for software update using the procedure described above. See Prepare the Console, page 43. Step 4: Insert the SD card into the console. The update will start automatically and the console will boot into the new updated software after the process is complete. SmartFade v1.5 User Manual