Download 3720 kB
Transcript
218 • Appendix Example Configurations using WAGO-I/O-CHECK Table 44: Mailbox command "AllowRemoteDevice" Byte 10 9 8 7 6 5 4 Toggle Opcode empty C/S PD/O 0x00 0x06 0xC6 0x__ 0x__ 0x__ 0x22 0x00 0x83 0x00 0x20 PD/I 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x83 0x00 0x60 10. In bytes 5 through 10 of the master, write the MAC address of the fourth Bluetooth® slave (see Table 45). 11. Using 0x23 (TABLE_ENTRY) in byte 4, indicate the fourth table entry in which the MAC address is to be written. 12. Change the toggle byte to 0x80 to execute the mailbox command (opcode 0x83) again. Table 45: Mailbox command "AllowRemoteDevice" Byte 10 9 8 7 6 5 4 Toggle Opcode empty PD/O 0x00 0x06 0xC6 0x__ 0x__ 0x__ 0x23 0x80 0x83 0x00 0x20 PD/I 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x80 0x83 0x00 0x60 WAGO-I/O-SYSTEM 750 I/O Modules C/S