Download User Manual - Forensic Explorer

Transcript
Chapter 6 - Forensic Acquisition
4.
Display and save event log.
When “Hash or Verify” is selected, the subsequent work flow is:
1.
Select source;
2.
Verify;
3.
Display and save event log.
The workflow is discussed in more detail below:
6.2.5
1. SELECTING THE SOU RCE
When the “Acquire”, “Convert” or “Hash or Verify” button is selected, the source
selection screen is displayed enabling selection of the source media:

When “Acquire” is selected, the source window shows the available physical
devices (hard drives, USB drives, camera cards, etc.) and logical devices
(partitions or volumes on the physical devices, e.g. "C:" drive) attached to the
forensic workstation.

When “Convert” is selected, the source window allows the selection of the
source image file. Click the “Add Image” button to add the required image file
to the selection list.

When the “Hash or Verify” button is selected, the source window allows the
selection of either a physical or logical drive, or an image file.
Figure 29, Forensic Imager - selecting the source device (Hash or Verify option shown)
The device selection window includes the following information:
Copyright GetData Forensics Pty Ltd 2010 - 2014, All rights reserved.
47 | P a g e