Download Installation Guide

Transcript
FileDirector Installation Guide
FileDirector with a firewall
INTERNAL (LAN)
INTERNET (WAN)
[1]
Port 80
[2]
Internet
Internal IP-address: Port
[4]
Port 80
e.g. 192.168.1.10 : 80
External IP-Adresse
[7]
[3]
[3]
http:// (e.g. Port 80)
[5]
WindowsAuthentication
https:// (Port 443)
[9]
[6]
fd-server
fd-admins
[8]
fd-user
Internal Log-in: Windows-Authentication:
In internal network normally windows authentication is used. This authentication
regards all internal windows rights. For the windows authentication several ports
are used. If requests come from outside access the system, only one port is
normally enabled. Through this port the basic authentication must take place.
External Log-in: Standard-Authentication
An external Log-In is carried out via basic authentication, because only one port is
needed and through the firewall only those ports used for communication should
be open. The user has to log-in with user name and password on the requested
webpage. The user account must be known in LAN.
External Access with log-in using basic authentication:
If a user should access data from the FileDirector sever from outside with log-in,
he must be known in the LAN with his account and this account must be in one of
the FileDirector groups (fd-scan). (Accounts on domain controller [6])
The user calls FileDirector with WinClient [1] or WebServer [2] via Internet [3] and
receives a Login-window.
The Firewall [5] has only one open port (80) [4], which only allows basic
authentication. In IIS [7] basic authentication must be allowed.
For log-in of internal clients [8] and [9] Windows-authentication can be used. This
must also be activated in IIS on [7].
Network Security
Page 61