Download ITX-i290D
Transcript
BIOS DRAM Frequency This item allows you to set the frequency of DRAM.. Options: Auto (Default) / 667MHz Configure DRAM Timing by SPD This item allows you .to determine DRAM timing by SPD Options: Enabled (Default) / Disabled DRAM CAS# Latency Options: 5 (Default) / 3 / 4 / 6 DRAM RAS# to CAS# Delay Options: 6 DRAM Clocks (Default) / 2 ~ 7DRAM Clocks DRAM RAS# Precharge Options: 6 DRAM Clocks (Default) / 2 ~ 7DRAM Clocks DRAM RAS# Activate to Precharge Options: 15 DRAM Clocks (Default) / 4 ~ 14 DRAM Clocks Initate Graphic Adapter Select which graphics controller to use as the primary boot device. Options: PCI/IGD (Default) / IGD Internal Graphics Mode Select Select the amount of system memory used by the Internal graphics device. This item will be different as your memory modules. When the memory size is decided, this frame buffer size will also be fixed. Options: Enabled, 8MB (Default) - 46 -