Download emutel Symphony - Arca Technologies

Transcript
X.25 OPERATION
outgoing at one side is deemed as incoming at the other.
To expand on this:
When placing a call from DTE 1 to DTE 2 the following happens.
3. Call passed through sim u lator.
4. D C E 2 p a sses the call
o u t to D T E 2 “ o u t g o i n g ” .
DCE 2
DCE 1
2. DCE 1 sees the call from
D T E 1 as “incom ing”.
5. DTE 2 sees the call
arrive as “incom ing”.
DTE 2
DTE 1
1. DTE sends an “outgoing”
call.
The process is reversed for a call in the opposite direction (i.e.
DTE 2 to DTE 1).
Logical Channel Setup
DTE
Outgoing
Two-way
Incoming
DCE
Incoming
Two-way
Outgoing
Assuming that the simulator settings are not changed (highlighted
in italics below), then the DTE settings will be as follows.
Channel
5&6
3&4
1&2
Channel
5&6
3&4
1&2
The Two-way channels are used as reserve logical channels, and
as they are bi-directional they support both Incoming and
APPENDIX 1
96