Download OI-TS User Manual

Transcript
MENUS: 7 ADMINISTRATION
7 - 18
Note:
These parameters have no effect on how the connected devices
operate. They are evaluated by the operator interfaces only to
provide clearer display.Applications that are not set up or are
assigned incorrectly have no effect on the functionality of
devices.
Figure 7.1 shows an example of a distributed system consisting
of three D-MAX Controllers and a SE-46 sensor. Each individual
element of the distributed system has its own menu structure.
These elements must be operated from a separate operator
interface OI-TS.
All devices present in the distributed system can be selected in
operator interface OI-TS.
y
r
a
in
∙ Touch the header and select Network
All the devices of the distributed system that are present in
the network are displayed.
#1/1:
#1/2:
#2/1:
#3/1:
#3/2:
#16/7:
D-MAX Controller
D-MAX Controller
D-MAX Controller
D-MAX Controller
D-MAX Controller
SE-46 Sensor (on
P
il m
e
r
with address 1/Drive 1: Guiding (e.g. offset pivot guide)
with address 1/Drive 2: Sensor positioning
with address 2/Drive 1: Guiding (e.g. offset pivot guide)
with address 3/Drive 1: Sensor positioning
with address 3/Drive 2: Sensor positioning (on the second page of the display)
the second page of the display)
Figure 7.1: Example of a distributed system - non structured display
Menüs.fm
To be able to navigate effectively within such a complex
network, individual "devices" and the corresponding menu
structures are combined to form applications. Thus an
application consists of several menu structures in a distributed
arrangement (see Figure 7.2).
www.maxcess.eu
D-MAX with OI-TS
MI 5013 1 A