Download User Manual (Local)

Transcript
On the Camera tabbed page, the featured settings are:
Setting
Description
Default
Selects a camera channel to configure.
Motion from camera
Enables/disables the system’s action(s) when video
motion is detected.
 To have the setting effective, make sure the
camera’s video motion detection is enabled on
camera web.
Deselected
(Disabled)
Connection lost
Enables/disables the system’s action(s) when it
detects disconnection from the camera.
Deselected
(Disabled)

Defines a time period to keep the event &
action active.
 Once an event is enabled, the event (& action) is
active from 00:00 through 23:59 by default.
--
Output

When an event occurs, the system will send an
output signal to other connected devices.
 Once selected, a Detail dialog opens for users to
set which output pin to send the output signal
through.
Deselected
(Disabled)
Email

When an event occurs, the system will send
Email notifications. Make sure to add an Email
address first.
 To set up the Email(s) to receive notifications, see
Email.
 Once selected, its Detail dialog opens for Email
selection.
Deselected
(Disabled)
push
notification

When an event occurs, the system will send
instant message to the registered mobile clients as
a notification. Mobile users can check the recording
videos on mobile client to watch what just
happened.
 See Push Notification for details.
 Once selected, its Detail dialog opens for user
selection.
Deselected
(Disabled)
CMS
When an event occurs, the system will send out a
signal to CMS. CMS will highlight this event.

You may choose whether sending with
snapshot or not.
Deselected
(Disabled)
Schedule button
Action
64