Download Chapter 4 Data reduction logical step sequence

Transcript
FLAMES-UVES Data Reduction Users’ Manual
VLT-MAN-ESO-19500-3016
21
Command Syntax: FMTSTAB/FLAMES format_check_frame [out_cat] ref_cat [xy_mbox]
[xy_trans] [angle]
Input:
• format_check_frame: Frame taken with one single fibre illuminated with an arc lamp, and all
other fibres dark. Must be either upper or lower chip, therefore SPLIT/UVES must be used first.
• out_cat: Optional output products catalogue. Set it to ‘+’ to skip this option. Default is +.
• ref_cat: Optional output reference frame catalogue. Set it to ‘+’ to skip this option. Default is +.
• line_table: Reference arc lamp line table, used for line identification.
• xy_mbox: A two-value, comma-separated parameter indicating the X and Y sizes of the search box
within which a physical-model line-position prediction is matched with the actual position on the formatcheck frame. Default: 40,40.
• xy_trans: A two-value, comma-separated parameter indicating respectively the X and Y translation
values respect to a standard configuration to be applied to the physical model solution to obtain a good
match with the actual formatcheck frame. Proper parameter for each instrument setting can be found
using the command MODOFF/FLAMES.
• angle: A three-value, comma-separated, parameter with angle offsets of the echelle, the cross disperser and the CCD in degrees. Default: 0,0,0.
Output:
• Same as FMTSTAB/UVES, PREDICT/FLAMES, PREDICT/UVES
In particular, in the end the procedure shows the average and median X and Y shifts of the actual format-check
frame with respect to the reference format-check frame.
Command description:
Built around the command FMTSTA/UVES, to derive guess order table, line table, and background table from
format-check frame. See also description for PREDICT/FLAMES.
Creates a table of measured line positions for the actual format-check frame and the given reference formatcheck, and through a correlation of the two determines the average and median X and Y shift of the actual
format-check frame with respect to the reference format-check frame. This step is successful when the the final
“physical model plots” show a good aggregation, in particular the plot of XDIF (differences between model
predictions and data points along dispersion direction) vs X (dispersion direction) and YDIF (differences
between model predictions and data points along cross dispersion direction) vs Y. (cross dispersion direction).
Please consult [1] for clarifications.
6.3.3 PREDICT/FLAMES
This command is an adaptation of the UVES context command PREDICT/UVES to the FLAMES context
(see [1]). We suggest the user to have a look also at [1], chapter 3, which provide useful plots to evaluate the
quality of the guess solution obtained with the current frame. It is supposed to be used in combination with
the command MODOFF/FLAMES, which gets the appropriate physical model shifts.
Command Syntax: PREDICT/FLAMES format_check_frame [out_cat] line_table [xy_mbox]
[xy_trans] [angle]
Input: