Download 1. - Motionsolutions.com
Transcript
user_en.book Page 15 Tuesday, April 17, 2007 11:35 AM Section 1 Product Overview Operation Overview Section 2 p.17 Prepare the required components and connect them. Main Peripheral Devices • Cable • Power supply device • Contactor Reading 2D Code Section 1 Operation Overview Installation and Connections Section 3 p.35 Turn ON the power and press the trigger buttons to read the code. • Reading method • Field of view setting • Display details System Settings Section 4 p.43 Basically, no settings are required. However, in the following cases, the settings may need to be changed using the Setup window of the Code Reader or the special tool [2DCR Configear]. • To change the communication conditions (See note.) • To use various functions If [2DCR Configear] is used, the changes you have made will be reflected to the Code Reader using the Memory Card or the communication function of [2DCR Configear]. *1 The default settings are as follows: Baud rate: 9,600 bps; Parity: None; Data length: 8 bits; Stop bits: 1 bit V400-H111/211 User’s Manual 15