Download Preface
Transcript
Chapter 7 Setting of Servodrive General Function Codes IS500 Servodrive User Manual For example: If Vcc=+24 V, then, R1=2.4 kΩ; If Vcc=+12 V, then, R1=1.5 kΩ; If Vcc=+5 V, then, R1=200 Ω. Wiring open collector through PL1/PL2/PL3 for pull-up helps to utilize the 24V power supply in the servodrive. Servodrive 24V CN1 3 2.4kΩ 13 18 150Ω Host controller /PULS /SIGN /CLR COM 15 14 50 150Ω Terminals 3, 13 and 18 indicate PL1, PL2 and PL3 respectively. 【Note】 ■ 7 8 11 150Ω 12 Setting the pulse reference input form There are four pulse reference input forms, set in H05-15. Function Code H05 Name Reference Pulse Form Setting Range 0: Direction + pulse, positive logic (default value) 1: Direction + pulse, negative logic 2: Phase A + Phase B Orthogonal pulses, 4 multiple frequency 3: CW+CCW Min. Unit 1 Factory Setting 0 When Enabled After Restart Data Type Stop Setting Related Mode P 15 - 104 -