Download Moxa Command Line Interface (CLI) Manual
Transcript
Moxa Command Line Interface Commands Cannot configure on trunk member port 1/1! This setting cannot be applied on trunk port! Related show interfaces ethernet commands gmrp Use the gmrp interface configuration command on the switch to active the IEEE 802.1D-1998 GMRP (GARP Multicast Registration Protocol). Use the no form of this command to stop this function. Commands gmrp no gmrp Syntax gmrp Enable GMRP (GARP Multicast Registration Protocol) Description Defaults gmrp is default disable Command Interface configuration Modes Usage N/A Guidelines Examples PT-7828(config)# interface ethernet 1/1 PT-7828(config-if)# gmrp PT-7828(config-if)# no gmrp Error messages GMRP cannot be enabled on static multicast member port!!! Related commands gvrp Use the gvrp global configuration command on the switch to enable GVRP. Use the no form of this command to disable it. Commands gvrp no gvrp Syntax gvrp Enable/Disable GVRP Description Defaults The feature is enabled by default. Command Global configuration Modes Usage N/A Guidelines Examples PT-7828(config)# gvrp gvrp Error - Enable GVRP N/A messages Related show gvrp commands 2-20