Download Abaqus Glossary

Transcript
GLOSSARY
at any time. The model database in use is known as the current model database, and Abaqus/CAE
displays its name across the top of the main window.
For more information:
• “What is an Abaqus/CAE model database?,” Section 9.1 of the Abaqus/CAE User’s Manual
model definition
The internal Abaqus representation of the model.
For more information:
• “Defining a model in Abaqus,” Section 1.3.1 of the Abaqus Analysis User’s Manual
• “Controlling the input file generated by Abaqus/CAE,” Section 9.10 of the Abaqus/CAE User’s
Manual, in the online HTML version of this manual
modeling space
The space a part inhabits. A part can inhabit three-dimensional, two-dimensional, or axisymmetric
modeling space.
For more information:
• “Part modeling space,” Section 11.4.1 of the Abaqus/CAE User’s Manual
module
A functional unit of Abaqus/CAE. Each module defines a logical aspect of the modeling process,
such as defining the geometry, defining material properties, and generating a mesh, and contains
only those tools that are relevant to a specific portion of the modeling task.
For more information:
• “What is a module?,” Section 2.3 of the Abaqus/CAE User’s Manual
monitor
See job monitor.
movable part instance
The part instance whose position can change during the application of an assembly constraint in
Abaqus/CAE.
For more information:
• “How the position constraint methods differ,” Section 13.4.2 of the Abaqus/CAE User’s Manual
MPI (message passing interface)
A software library defined by the MPI standard that is used to parallelize software. MPI is typically
used to enable execution on compute clusters or networks of workstations but provides effective
G–39
Abaqus ID:
Printed on: