Download Delphin 5 Help

Transcript
CHAMPS Modeling
48
Keyword
Explanation
Limits
(recommended)
SI-Uni
t
TEMPER
Temperature
-20 ... 60
°C
RELHUM
Relative humidity
0 ... 100
%
VAPPRESS
Water vapor pressure
0 ...
Pa
NORRAIN
Rain flux density normal to the wall surface
0 ...
l/m2s
HORRAIN
Rain flux density on a horizontal plane
0 ...
l/m2s
WINDDIR
Wind direction, North=0 Deg, East=90 Deg,
...
0 ... 360
Deg
WINDVEL
Wind velocity
0 ...
m/s
SHWRAD
Short wave radiation (balance)
0 ...
W/m2
DIRRAD
Direct sun radiation (short wave component)
0 ...
W/m2
DIFRAD
Diffuse sun radiation (short wave component)
0 ...
W/m2
LOWRAD
Long wave radiation (balance)
LWEMIS
Heat emission from surrounding ground (long
wave component)
... 0
W/m2
SKYRAD
Atmospheric counter radiation (long wave
component)
0 ...
W/m2
CLOUDCOV
Cloud covering (alternative to long wave
radiation)
0 ... 1
-
PREHEAD
Pressure head
m
WATFLUX
Imposed moisture flux
kg/m2
s
HEATFLUX
Imposed heat flux
W/m2
SALTCONT
Salt solution (concentration as molality)
GASPRESS
Gas (air) pressure
VOCDENSG
Intrinsic VOC density in gas phase
W/m2
0 ...
mol/kg
Pa
0 ...
kg/m3
Table 2: Climate conditions of Delphin 5
The Keyword is used to identify the respective data record in the Delphin 5 project file.
The Limits are recommended values. There is no automatic check by the program.
Possible physical units are the SI-Unit or any convertible unit.
4.2.2
Boundary conditions
The boundary conditions describe model selections, parameters, time limits and assigned
climate conditions. The user can define boundary condition data records using the
Boundary Condition Edit Dialog. Table 3 shows the predefined boundary conditions,
explanations, and related fluxes according to the balance equations.
© 2005-2006 Andreas Nicolai and John Grunewald