Download User Manual WEB

Transcript
Diagram: B
Charging method C
INDICATOR: ORANGE
INDICATOR:
YELLOW
Orange
INDICATOR: GREEN
STEP 1 – CONSTANT CURRENT CHARGE
Charge
Voltage
To start a charge cycle; connect the charger
to the
mains.
Charge
Voltage
The charger is in constant current mode, charging with the maximum current
indicated
on
the charger, the LED-indication on the charger is ORANGE (or RED 9640). This step allows
rapid charging of your battery until the battery reaches typically 80 - 95% of its capacity.
STEP 2 – CONSTANT VOLTAGE (TIMER) CHARGE
The charger is in constant voltage mode, charging with a decreasing current. The LEDCharge Current
indication on the charger is YELLOW. The charger is now in timer mode indicated by the
YELLOW LED and will remain in this mode until time interval is completed. The battery is
charged to its full capacity at the end of this step.
STEP 3 - CHARGE COMPLETE
The LED-indication on the charger is GREEN and the battery is fully charged.
Cut-Off
For Li-Ion batteries the charge current is zero
and theCurrent
battery has been charged to its
full capacity. Step 1
Step 3
Step 2
Charge
Charge
complete
Charge
The chargeCC
voltage
is at standby level whichCV
means
that the charger can continue
to be
connected to the battery. After end of charge battery voltage will remain at “Step 2” level
even if output voltage of charger is indicated as lower in the diagram.
The charger will return to Step 1 if the battery is used. A load larger than the constant
current level in Step 1 will initiate a new charge cycle.
Orange
Orange
Green
Orange
Orange
Yellow
Green
Orange
Yellow
Li-Ion diagrammer
Yellow
Green
Yellow
Yellow
Yellow
Diagram: C
INDICATOR: ORANGE
INDICATOR:
YELLOW
INDICATOR: GREEN
Charge Voltage
Charge Voltage
Charge Current
Cut-Off Current
Step 1
CC Charge
Step 2
CV Charge
9
Step 3
Charge complete