Download DIGITAL CAMERA

Transcript
Electronic Analog Exposure Displays
The electronic analog exposure displays in the top control panel and viewfinder show
whether the photograph would be under- or over-exposed at current settings. Depending on the option chosen for Custom Setting b3 (EV step), the amount of underor over-exposure is shown in increments of 1/ 3 EV, ½ EV, or 1 EV. If the limits of the
exposure metering system are exceeded, the displays will flash.
“EV step” set to “1/3 step”
ViewTop control panel
finder
“EV step” set to “1/2 step”
ViewTop control panel
finder
Optimal exposure
“EV step” set to “1 step”
ViewTop control panel
finder
Underexposed by 1/ 3 EV
Underexposed by ½ EV
Underexposed by 1 EV
Overexposed by more than 3 EV *
* At 1/3 step,
appears in the viewfinder when overexposure exceeds 2 EV.
Long Exp. NR ( 175)
To reduce noise at shutter speeds of about ½ s or slower, select On for the Long exp.
NR option in the shooting menu. Note that noise and color distortion increase with
temperature.
b3—EV Step ( 192)
This option controls whether changes to shutter speed and aperture are made in increments equivalent to 1/ 3 EV (the default setting), ½ EV, or 1 EV.
f6—Command Dials ( 210)
Command dials > Change main / sub and Command dials > Aperture setting control whether aperture is assigned with the main command dial, the sub-command dial,
or the lens aperture ring. Regardless of the settings chosen, the command dials are
always used with type G lenses, the lens aperture ring with non-CPU lenses.
95
Taking Photographs—Exposure
Non-CPU Lenses
If the maximum aperture of the lens has been specified using the Non-CPU lens data item in shooting
menu (
131) when a non-CPU lens is attached,
the current f/-number will be displayed in the viewfinder and top control panel, rounded to the nearest full stop. Otherwise the aperture displays will show only the number of stops
) and the f/-number must be read from
( , with maximum aperture displayed as
the lens aperture ring.