Download EZText Panel User Manual

Transcript
MAINTENANCE AND TROUBLESHOOTING
CHEMICAL
RATING
Potassium Hydroxide @ 1%
Potassium Hydroxide conc.
Propane Gas
Propylene Glycol
Propylene Oxide
Resorcinol sat.
Resorcinol @ 5%
Salicylaldehyde
Salicylic Acid Powder
Salicylic Acid sat.
Salt Solutions Metallic
Silver Acetate
Silver Nitrate
Sodium Acetate sat.
Sodium Hydroxide @ 1%
Sodium Hydroxide @ 50%+
Sodium Hypochlorite @ 15%
Stearic Acid Crystals
Sulfuric Acid @ 6%
Sulfuric Acid @ 20%
CHEMICAL
N
N
N
F
F
F
F
F
G
G
E
G
E
G
N
N
F
G
E
G
RATING
Sulfuric Acid @ 60%
Sulfuric Acid @ 98%
Sulfur Dioxide Liquid
Sulfur Dioxide dry
Sulfur Salts
Tartaric Acid
Tetrahydrofuran
Thionyl Chloride
Toluene
Tributyl Citrate
Trichloroethane
Trichloroethylene
Triethylene Glycol
Tripropylene Glycol
Turpentine
Undecyl Alcohol
Urea
Vinylidene Chloride
Xylene
Zinc Stearate
F
N
G
G
N
G
N
N
N
N
N
N
G
G
N
F
N
N
N
E
Screen Overlay Cleaning
The EZText Panel screen should be cleaned as needed with warm, soapy
water.
Gasket Replacement
The gasket may need to be replaced if it becomes damaged or worn. To
replace the gasket, use P/N EZ-TEXT-L-GSK. To replace the gasket perform
the following steps:
86
1.
The gasket is removed and replaced from the back of the unit. Ensure
that all pieces of old gasket have been removed from the panel
enclosure surface where the gasket is affixed.
2.
Remove the new replacement gasket from its plastic bag.
3.
Remove the temporary protective covering from the adhesive side of
the gasket.
4.
Position gasket (adhesive side down) over the panel gasket surface
and press firmly.
EZ-TEXT-P-M