Download Manual
Transcript
6 How to use Caution Be aware of not drowning a remote control in water. It may cause out of order or malfuction. All fuctions will be operated when the seat is occupied except Nozzle Cleaning. Stop Press "STOP" to stop all operation. When a user stands up, all operation will stop automatically. Temperature Adjustment Cleansing Press "CLEANSING" to clean the posterior. The function stops in a minute automatically. Press "CLEANSING" again to activate moving wash. The nozzle moves back and forth automatically to widen cleansing area. Bidet Press "BIDET" for front cleansing. The function stops in a minute automatically. Press "BIDET" again to activate moving wash. The nozzle moves back and forth automatically to widen cleansing area. Dry (UB-2220, 2235 only) Press "DRY" button after "CLEANSING" or "BIDET". Dry function stops in 3 minutes automatiocally. Water temperature and seat temperature can be adjusted to your setting level by pushing "'HI" or "LO". There are 4 levels (room temp, low, middle and high). Water Pressure / Dry Temperature adjustment The strength of water spary pressure can be adjusted by pushing "HI" or "LO" for your setting level. (5 levels) The temperature of air dry can be adjusted by pushing "HI" or "LO" for your setting level. There are 5 levels for both fuctions. (5 levels) Power Saving Press " STOP" to save the electric power while not sitting on the seat. In the economy mode, temperature of water and seat keeps to 30 celsius degree. Green light will be shown on the extra panel. When the unit is occupied in the economy mode, temperature is changed to desired level and goes back to 30 celsius degree automatically after using. Press "STOP" again to release the economy mode. Red light will be turned on. Temperatures are kept to desired level all the times. To alter the strength of air drying, press "DRY" again. Self Cleaning Air Press "AIR" to make aerated water spray which is made from a special air pump built in. Stronger but smoother aerated water spray can save water consumption. This appliance keeps clean itself automatically by rinsing off the nozzles before and after operation of BIDET or CLEANSING. Nozzle Cleaning Press "FR" to clean the CLEANSING nozzle manually while not sitting on the seat (not occupying) Massage Press "MASSAGE" to provide pulsating water spray for feeling better. Press "MASSAGE" again to stop the opreration. Press "FR" again or "STOP" to return the nozzle to stand by mode. Press "BK" to clean the BIDET nozzle manually while not sitting on the seat. (not occupying) Press "BK" again or "STOP" to return the nozzle to stand by mode. Do not forcefully push or pull the nozzles or bend them. Automatic Deodorizer (UB-2235 only) When the appliance is in use, the deodorizer operates for up to 20 minutes automatically. When a user stands up during the operation, it stops in a minutes. Nozzle Position Adjustment The postion of nozzle can be adjusted by pushing "FR" or "BK" for your setting position. Self-diagnosis System This appliance has a self-dianostic system, whenever the appliance has a problem, a LED of seat temperature or water temperature will blink. Unplug the electric power cord and contact to your dealer.