Download FC5A Modbus Communication Training

Transcript
2.1.3
Programming WindLDR - Setting up the Modbus Master
(1) Create a new program and select the appropriate PLC type. In this example, select FC5A-C10R2.
(2) Select Configure > Function Area Settings from the main menu to open the Function Area
Settings dialog box, and then select the Communication tab.
(3) Select Modbus RTU Master from the dropdown list for Port 2, the Modbus Master Request Table
dialog box will appear.
(4) Define the first communication request.
Modbus Master
Request #1
D0100
Modbus Slave
Read
D8057
(5) Click on the Function Code cell for Request #1 in the dialog box, and the dropdown list will appear.
From the dropdown list, select the 03 Read Holding Register.
6