Download User Manual
Transcript
4.3 Rear Panel 8-Port KVM Switch (1) (2) (3) (4) (5) (6) 8-port KVM Switch Rear Panel (1) Power cable connector Connect power cable to power socket. (2) Connectors for servers [1 through 8 or 16] Connect each port (1 through 8 or 16) on this device to the relevant host’s keyboard, mouse and monitor connectors with the special cable. (3) DIP switches Use for a variety of settings. Numbered from left side while facing the switches starting from 1, 2…8 or 16; up is on and down is off. (4) Keyboard connector Connect a PS/2 keyboard connector (purple). (5) Mouse connector Connect a PS/2 mouse connector (green). (6) Monitor connector Connect a monitor. 16-Port KVM Switch 16-port KVM Switch Rear Panel 17