Download The UPS Howto
Transcript
The UPS Howto
continue;
default:
break;
}
powerfail(status);
}
/* Never happens */
return(0);
}
8.4 Trust UPS 400−A
I received a submission about the Trust UPS 400−A. I don't know if it's the same as the Trust Energy
Protector 400, so I'm including the submission.
From: "Marcel Ammerlaan" <marcel@ch.twi.tudelft.nl>
To: hjstein@math.huji.ac.il
Subject: UPS addition
Date: Wed, 16 Jul 1997 01:17:11 +100
Hello Harvey,
I've got an addition to your UPS Howto. I've got a
"Trust UPS 400−A" which isn't listed. This product doesn't seem
to be manufactured anymore by it's producer (www.trust.box.nl).
But that doesn't mean it's not available anymore, I've got mine
really cheap just a month ago. Also this company just relabels
products so maybe there are others that have got the same UPS.
I have included a picture of the UPS in case anybody got such a beast
under another label.
The cable was easily constructed based on the original powerd cable
and the documentation from trust.
It clearly describes which pins of the D−shell connector of the UPS
carry which signal.
It extends the original design with 2 extra functions:
1) Battery low indication
2) Power down UPS
The cable I created looks like (see the other attachement).
This cable has been tested with powergend by Tom Webster and did work
completely (although your milage may vary).
Type:
Cable Power:
Inverter Kill:
Inverter Kill Time:
Power Check:
Battery Check:
8.4 Trust UPS 400−A
"pleur"
{TIOCM_DTR,0}
{TIOCM_RTS,1}
5
{TIOCM_CTS,0}
{TIOCM_CAR,0}
33