Download 6 - Brionvega

Transcript
4
Connections
panel
Audio Connections
Pre-Out Output
The Radio-phonograph rr-226 is equipped, on the
back, with an audio connections panel.
Using the Pre-Out audio output [28] an external
amplification device can be connected to the
Radio-phonograph.
If an external amplifier is connected, the loudspeakers
of the Radio-phonograph will continue to sound.
To disable them, it will be necessary to disconnect
the loudspeakers from the audio connections panel
[23] located on the back of the Radio-phonograph
(see page 5).
The volume control knob will have no control
over the signal level coming out of the Pre-Out
connection [28].
AUX 1
PRE OUT
AUX 2
SUB
CUFFIE
Aux 1-2 Input
RADIO
AM-FM
AST
PHONO
Headphone Socket
CD
AUX1
AUX2
LOUD
Using the Aux 1-2 input [22], an external audio
reproduction device can be connected to the
Radio-phonograph, using the Radio-phonograph
as an amplification system.
In order to be able to listen to the external audio
source, it will be necessary to activate the specific
function on the front push-button control panel
(push button AUX1 or AUX2). In addition to the
volume adjustment, the knobs for the audio level
adjustments will also remain functional.
Using the Headphone Socket [29], a pair of
headphones or earphones can be connected
to the Radio-phonograph. When the connection
jack is inserted, the audio of the loudspeakers will
automatically be disabled.
Sub Output
Using the Sub audio output [27], a supplementary
preamplified subwoofer can be connected to the
Radio-phonograph.
7
RR-226_UK.indd 7
21-11-2008 12:10:00