Download The Leitz-Lexicon
Transcript
1.1 Tooling systems Not all tools are resharpenable particularly those where the dimensions must remain constant. For example PCD tipped tools that are sharpened on the cutting edge but must have a constant diameter such as T-groove cutters. Sharpenable PCD tools are not recommended for applications needing constant diameters such as tools working with tracing wheels – trimming heads on double end tenoners. Constant diameter and sharpening the cutting edge do not work together, and it may be more economical to consider throwaway tools for these applications. Alternative designs may be possible for example splitting the tools into more than one part or to using cutterheads with replaceable cutting edges. These more complex tool designs have higher run-out tolerances arising from the assembly of the parts. Also there is a positioning tolerance of at least 0.03 mm when replacing a throwaway cutter. Leitz ProFix cutter heads are an exception; whilst the ProFix knives are face sharpened the profile is guaranteed to remain constant. This is a feature of the design of the Profix constant profile/constant diameter tooling system. Most tools have steel tool bodies and Leitz only uses top-quality accredited quality steels. Steel tool bodies are durable, rigid and resistant to wear. However large tools and tools for CNC machining centres may be too heavy if made of steel. In these cases the tool bodies are made of Aluminium and Leitz uses the high-strength aerospace specification alloys to guarantee their safety and resistance to wear. The ProfilCut replaceable knife clamping system is ideal for Aluminium bodied tools. Aluminium tools require special handling, details in the Leitz manual. User Manual 1. Overview 721