Download RS18 MANUAL v1.02
Transcript
Page 38/54 RAY SUBS IMPLEMENTATION IMPORTANT - “Steering” techniques should not be applied to clusters of less than 3 RS18; - Coverage control through steering technique increases with cluster height. Steering can be applied by unit, group of 2 or group of 3 in Omni Mode as well as in Directional Mode. θ θ t t GROUP OF 2 RS18S STEERING GROUP OF 3 RS18S STEERING “Steering” delays values for the pairs can easily be computed according to following formula: τ = h*sin(θ)/C (metric) τ is the value to be applied to the second pair h is the height of tilted elements ( 1.04m for 2 RS18s, 1.56m for 3 RS18s) C is the speed of sound ( = 343m/s ) 7.3.2 Delay values implementation • If the coverage is to be tilted down, then top group delay should be set at 0ms and delay should progressively increase on lower groups. • If the coverage is to be tilted up, then lower group delay should be set at 0ms and delay should progressively increase on upper pairs. • Delay value for first group is always 0ms. • Delay value for second unit or group is τ • Delay values for subsequent units or groups are 2τ, 3τ etc…