Download Qtractor - rncbc.org
Transcript
Noise Removal
17.5. Noise Removal
Noise removal is something of a myth borne of automatic filters bundled with recording applications.
It is not possible, in spite of what the advertisements say, to isolate noise on a track and eliminate it
without also removing that same frequency from what you deem to be signal.
The manual elimination of noise is easiest with Jamin HDEQ; first scan your sound for the frequency
containing most of the noise as described in Section 17.4.1, “ Jamin ”, and then invert the resonance
curve to eliminate the noise you've found.
Automated noise removal filters do the same process; analyze a sample of user-defined "noise" and
then EQ the offending frequencies out.
17.6. Reverb
Reverb is an old ever-popular recording effect that simulates the phenomenon of a sound wave
bouncing off of surfaces, causing the soundwave to bounce back in a new direction; our ears hear the
original sound wave as the source and the reverberated sound wave as an echo.
Note
Common examples are large cathedrals, famous for very saturated and immediate echoes,
and canyons, with the stereotypical distant and delayed echo ("Hello....hello........hello..."). You
might also notice less drastic examples in, for instance, small empty closets, or you might try
speaking into a coffee tin; the reverberation is immediate and subtle, but it's still clear that there
are soundwaves bouncing back at you.
Reverb effect units simulate this phenomenon and allow the uesr to control different aspects of how
the reverberation is generated.
17.6.1. Calf
As with the other Calf plugins, the Calf reverb can be used as a stand-alone application via
calfjackhost or as a plugin from within Qtractor. It features a good number of the most important
reverb controls:
• Decay Time - controls the length that the echo (tail) is heard before
• High Freq Damp - the tail of the reverb is dampened to simulate that sound loses energy and fades
out over time and distance. The High Frequency Dampening knob determines the frequency at
which the dampening begins
• Dry Amount - determines how much of the original sound is heard along with the reverb
• Wet Amount - determines how much of the reverb is heard
• Diffusion - structures the "spread" of the reverb; a highly diffused reverb effect spreads reverb
widely across the stereo space, where as a less diffuse reverb effect is more centrally located
• Pre Delay - determines the distance between the source signal and the start of the reverb
• Bass Cut - determines the frquency at which bass frequencies are truncated
77