Download Support Department APPLICATION NOTE Subject

Transcript
Prodys Support Department: Application Note
26
5.- MEASURING THE IP LINK BEFORE CALLING
Before making an IP connection, be it unicast or multicast, the user should
first check the quality of the IP connection. Prodys IP Codecs comes fitted
with a ‘Test Tool’ embedded in the web page. No additional software is
required. With this tool, the user can measure the most important
parameters of an IP connection: Download and upload bandwidth, delay,
jitter, lost packets and packet disorder.
5.1.-
TEST STREAMING TOOL
Access this tool by pressing the “SYS” button on the web interface,
select STREAMING – Test. Then, type in the IP address of the remote
unit and click on Start Test. By clicking on the different tabs, the user
get the information related to upload and download bandwidth, delay
quality of service. To stop the test, click on the ‘Stop Test’ button.
and
end
can
and
This information help you to decide which compression mode to use, and
adjust the streaming parameters, based on a truly accurate knowledge of
Prodys Support Department: Prodys IP FAQ
26