Download Manuals - OMEGA Engineering
Transcript
Theory of Operation As implied by the following matrix, the operational material does not apply globally to every DaqBoard/2000 Series board. For example, boards /2002, /2003, /2004 have no analog input. For ease of understanding, each board is discussed independently, following the matrix. Note that pinouts are provided in chapter 2. I/O Comparison Matrix I/O Comparison Matrix for DaqBoard/2000 Series Boards DaqBoard/ (PCI versions) Analog Input Channels Analog Output Channels Digital I/O Channels Counter/ Timers Analog Input signals enter through P4 , go to MUX, to PGA, to Gain & Offset Amplifier, then to Analogto-Digital Converter (ADC) Digital Signals go through Digital-to-Analog Converters, then through “DAC Out” on P4. Digital signals pass through one 16-bit Digital I/O Port and three 8-bit Digital I/O Ports located on P4. 16 2 40 6 16 4 40 6 -- -40 6 -- -- 40 6 40 6 Four 16-bit Counter Input signals and Two 16-bit Timer Output signals via P4 and System Controller. 2000 2001 2002 -- 2003 4 -- 2004 4 -- 2005 16 1-4 Daq Systems and Device Overviews 10-18-02 OMB-DaqBoard/2000 Series User’s Manual