Download Vortex 6000 Laser Controller

Transcript
from another instrument, such as a photodetector during a wavelength
scan.
Connect the line for the input signal to the BNC connector on the back
of the Vortex controller. Make sure the signal conforms to the following
specifications:
Auxiliary Input Guidelines
Connector Type
BNC
Voltage Range
0 V to +4 V
Input Frequency
DC–10 kHz
Impedance
10 kΩ
The update rate for the Auxiliary Input can vary, depending on processor demands,
from 10–100 milliseconds.
26 • General Operation