Download User Manuals

Transcript
6 Connecting to PC
System requirements:
Windows 2000, XP or Vista
Minimum hardware requirements
Pc or notebook, 90MHz Pentium of faster, 32Mb Ram,
At least 5Mb free hard disk space screen resolution
800×600.
6.1
•
•
•
•
•
Switch the light meter on.
Plug the other end of the connecting cable to serial interface of
the PC (USB).
Plug the USB line connecting cable 13,6mm jack plug into the
meter socket.
Start the light meter software.
Selecting the COM.
(Note: You should better switch the light meter on before you
plug the USB line connecting cable 13,6mm jack plug into the
meter).
6.2
•
•
•
•
•
•
•
•
Connection
Installing the software
Insert the CD into the CD-drive.
Installation should start automaticaly.
If not, run the SETUP.EXE from CD.
Now follow the installation program instructions.
Once the software is installed, switch on the meter.
Start the software.
Selected the COM port.
If the connection is in order, the following display will be seen
on the screen in the program.
11