Download Functional Description Manual
Transcript
5-44 Command Communication via Fieldbus ECODRIVE03 FGP-03VRS LED definition in module operation: LED design not assigned H60 Module status H61/MS LED state Definition red fatal error, replace card red flashing error can be cleared green flashing configuration error green ready OK Explicit Message query H62 green (impulse) in R/W via Explicit Message Network status H63/NS off not online green flashing online, but no connection to master green online master connected red flashing in I/O connection monitoring time exceeded red critical connection error (doubled MACID or Bus-Off red flashing no synchronization of fieldbus module with drive green flashing synchronization of fieldbus module with drive established off no I/O connection green I/O connection OK, outputs valid and input active green flashing outputs inactive (not sent by master) red flashing in I/O connection, monitoring time exceeded flashing regularly Severe fieldbus module failure, switch unit off and on. internal synchronization H64 (Alive LED) I/O status Severe fieldbus module failure H65/IO all LEDs Fig. 5-53: Diagnosis LED for DeviceNet DOK-ECODR3-FGP-03VRS**-FK02-EN-P
Related documents
ECODRIVE03 Drive for Machine Tool Applications With SERCOS
ECODRIVE03 Drive For General Automation with Fieldbus
Functional Description Manual
FWA-DIAX03-AHS-03VRS-MS
L20 03VRS - Systembeschreibung
Functional Description Manual
VisualMotion 6.0
Functional Description Manual
Rexroth Ecodrive CS Drive Controllers Troubleshooting Guide
XC2000 Logic Cell Array Families
SPARK - Harisree Palakkad
Community Accountability Planning Submission (CAPS) User Guide