Download User Manual

Transcript
Command Line Interface
Commands
TRFC
RGN [Parameters List]
Parameter List
Short Description
0
Sets EUR region
1
Sets USA region (a default setting)
2
Sets AUS region
The RGN command without parameter prints the Region number.
4.2.7. TRFC
The TRFC command is also responsible for configuring radio’s operation mode.
TRFC [Parameters List]
Parameter List
Short Description
0
0 – Disable Packet repeating
1
1 – Enable Packet repeating (a default setting)
2
2 - Transparent mode
If the TRFC=1 each Data Packet is transmitted twice: first time on the current time and frequency, second
time on the next time and frequency position.
If TRFC=2 (“Transparent mode” On) two modems implement a “full duplex” - duplex transmission
mode in which data transfer maintained “simultaneously” with the reception of data.
4.2.8. LSRT
The LSRT command is specific for USA and AUS region. It changes Link Simbol Rate.
LSRT [Parameters List]
Parameter List
Short Description
0
64000 kHz (a default setting)
1
32000 kHz
2
16000 kHz
3
8000 kHz
The LSRT command without Parameter prints Link Symbol Rate parameter.
www.arwestcom.com
23