Download Design Guide
Transcript
Qseven RISC Carrier Board Design Guide The reference schematic of HDMI is shown in FIigure 3-32. The HDMI_HPD must have a buffer IC to change input voltage from 5V to 3.3V. Figure 3-32 HDMI reference schematic 3.11 SPI Interface Advantech ROM-7420 provides additional SPI interface for extended functions, for example, user can attach a SPI flash device for storage purpose as well as ADC for analog data acquirement, audio codec for audio applications, or I/O devices for specific purposes such as a capacitive touch screen controller. Please note that user CANNOT use this SPI interface for booting function. 3.11.1 Signal Description Table 3-14 shows ROM-7420 SPI signals, including pin number, signals, I/O and