Download - TRX

Transcript
TRX-Manager (en)
Page 61 of 365
Use of the channels
The Kenwood transceivers generally defines two frequencies for each channel: the receive frequency and the transmit
frequency (Split). TRX-Manager takes this into account ; the channels editor allows you to enter the Shift between the two
frequencies (whatever you have to introduce a repeater Shift or simply different values for RX and TX). This
information may be also particularly useful for the introduction of the limit of the program scan function (channels 90 to
99); for example to scan from 14.00 to 14.35, it is necessary to introduce 14.00 as the frequency and 350 KHz as the Shift.
With TS-790 (channel 00-29) and TS-2000/480/590 you may define a repeater Offset (-/+/= ).
These functions are not supported by the current TS-990's driver.
Important Notes
Old rig: The selection of Wide filters (6K or 12K) is not possible in SSB or CW. The selection of Narrow filters is not
possible in AM and FM.
The repeater's Offset itself is not accessible on most Kenwood transceivers (recent rigs excepted); entering a repeater shift
in a memory channel initializes the associated split frequency (see above).
It may be, after having selected a channel from the PC, that it is not possible to select a VFO from the transceiver ! It is
then necessary to restart the program and to select a VFO... To limit this nuisance being repeated, TRX-Manager switches
to VFO before closing the serial port.
The Clear function may make the RIT button not working properly. It is suggested to center the RIT button then to press
on Clear to return to normal operation.
file:///C:/Help/index.htm
31/10/2015