Download PIP-Studio
Transcript
1.8 Select the color blue with an alpha value of 100% (i.e. not transparent) and confirm these settings. Now click on the next button (Size) to activate the slider control. As you can see, you can adjust the thickness of the border to between 0 and 40. Select a setting of 5 here. Finally, you can see the Blur button, which allows you to set the edge blur to between 0 and 100%. Simply select any setting you like or leave the default setting as it is. Once you have found the right position for your logo (e.g. at the coordinates 128, 84), confirm it by pressing the left trackball button and the toolbar is turned on again. Once you have made your settings changes, you can leave this toolbar by pressing the button in the bottom right corner and return to the original toolbar. You can now select the Shadow button which in turn opens a new toolbar dealing with the shadow settings. Now you have already placed your elliptically shaped logo in the top left corner and configured its size settings. The next button is labeled “Border.” Click on it to replace the existing toolbar with a new one. This new toolbar contains settings that refer to the border that is displayed in the top right corner of the toolbar. The first button in this toolbar is labeled “Direction“. Click on it to display a selection of 8 directions. Select the fifth in the list, i.e. the one pointing downwards. You can then open the color box again using the “Color“ button and select the color black. You can configure the transparency here as well – this time select an alpha value of 50%. You will now see the Color button. Click on it and open the color box. Using the next button labeled (Distance), you can determine how long the shadow should be beginning from the edge of the logo. Select a value of 5 here.