Download User Manual - Neteon Technologies
Transcript
• VPN connections - enable / disable You can activate (Enable = Yes) or deactivate (Enable = No) each individual connection. • VPN connections - editing Click on the Edit button next to the entry. Make the necessary or desired settings (see below). Then click on OK. • VPN connections - deleting Click on the Delete button next to the entry. Then click on OK. • Configuring a new VPN connection Click on New. Enter a name for the connection and then click on Edit. Make the necessary or desired settings (see below). Then click on OK. To enable or disable VPN connections from remote, connect to the mGuard using the following URLs: https://login:password@host/nph-vpn.cgi?name=Connection&cmd=(up|down) Example: https://admin:mGuard@192.168.1.1/nph-vpn.cgi?name=paris&cmd=up 6.5.3 Define a VPN connection After pressing the Edit button, the following page appears General Options A descriptive name for the connection You can assign the connection any name you desire. Enabled Specify whether the connection should be enabled (= Yes) or not (= No). 101 of 157