Download 1336 PLUS Adjustable Frequency AC Drive with Sensorless Vector

Transcript
Disassembly and Access Procedures
3–7
Removing Control Interface Board MOD–L4, –L5, or –L6
Figure 3.5 Control Interface Board
Main Control
Board
Control Interface
Board
Terminal Strip
TB3
AB0803B
Removal
!
!
ATTENTION: Disconnect and lock out power from
the drive before disassembling the drive. Failure to
disconnect power may result in death or serious injury.
Verify bus voltage by measuring the voltage between
the +DC/–DC Brake Terminals. Do not attempt to
service the drive until the bus voltage has discharged to
zero volts.
ATTENTION: Wear a wrist-type grounding strap
when servicing 1336 PLUS Drives. Failure to protect
drive components against ESD may damage drive
components. Refer to Electrostatic Discharge
Precautions at the beginning of this chapter.
Publication 1336 PLUS-6.6 – February, 2002