Download petition

Transcript
WE, OE, PWD, and VPP respectively. The
functions performed by these signals are described
in Appendix I. (‘Ex. 1003, at 7:39-45)
OE
OUTPUT ENABLE: Gates the device’s
outputs through the data buffers during a read
cycle. OE is active low.
WE WRITE ENABLE: Controls writes to the
command register and array blocks. WE is
active low. Addresses and data are latched on
the rising edge of the WE pulse.
Vpp ERASE/PROGRAM POWER SUPPLY
for erasing blocks of the array or
programming bytes of each block. Note:
With Vpp<VPPI Max, memory content
cannot be altered. When Vpp is at a high
level, programing can take place; if Vpp is at
a low level, the memory array 54 functions as
a read only memory.
(Ex. 1003, at 1525-37)
See claim 32 read-only mode.
33. The digital
computer system
according to claim
32 wherein said at
least one of said
operating modes is
said read-only mode
of operation.
See claim 32 write-only mode.
34. The digital
computer system
according to claim
32 wherein said at
least one of said
operating modes is
said write-only
mode of operation.
38. The digital
See supra at VII(A)(3); Ex. 1005, at ¶ 34.
computer according
to claim 32 wherein Holtey II teaches the use of a flash memory that is a non50